![]() ![]() ![]() The manufacturers know how many cycles you will put on your system in 5 to 7 years and they build pumps and tanks to only last that many cycles.Īnd no, filling the tank or making the pump produce only 1 GPM is actually easier on the pump than when pumping 10 GPM. ![]() Pumps and tanks are built with a certain number of cycles built into them. Then when you have a CSV to eliminate cycling, you really only need a tank with 1 gallon of draw down. If you eliminate repetitive cycling with a Cycle Stop Valve, the diaphragm in the tank as well as the pump and everything else in the water system will last much longer. The diaphragm moves up and down with every pump cycle. You won’t see water come out the air Schrader valve until the tank is completely waterlogged, unless you turn the tank upside down.ĥ.5 years of cycling on and off will break the diaphragm the same way bending a wire back and forth will eventually break the wire. My guess is the diaphragm has a hole in it and 3 gallons of water are now on top of the bladder in the air chamber. It is common to not get as much draw down as the chart shows, but usually not that much difference. If there were sediment buildup, the hole would be plugged. Any sediment that goes in is the first thing to come back out. The inlet/outlet hole is in the very bottom. It is rare for sediment to build up in those tanks. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |